Low Voltage Systems can present a Real Risk.

 An electric shock is caused when the human body makes contact with a “live” electrical circuit. The electrical current continues to pass through a person’s body. An electrical shock can cause extreme internal damage. This may cause heart fibrillation, and stop the heart from beating altogether. This could result in death by electrocution. For any organization, it will be necessary to have trained staff ready to deal with the effects of an electric shock. If there is any risk of this happening then low voltage rescuetraining Sydney has today can offer the appropriate training to deal with this.

Legal Requirements.

There are a number of Australian and State-based Health and Safety measures in place regarding the management of electrical shocks. The QLD Electric Safety Act, code of practice 2002, which was amended in 2011, states that any electrician working on “live” equipment, or equipment with the potential to be “live”, should have a safety observer present. Consequently, a safety observer is needed. Under the Electrical Safety Regulation Act 2013. A safety observer should be re certified every 12 months.

Therefore, this training is needed, and low voltage rescue training Sydney has today can provide this training.

LVR (Low Voltage Rescue) Training Provided.

The role of the observer goes a lot further than simply observing, as one has to be actively involved in initially helping anyone suffering from an electric shock or electrocution. The following will be covered by low voltage rescue training Sydney has to offer. Margaret Lewis OHS

Risk Assessments.

This is the starting point for all health and safety measures in any place of work. In the case of electric shocks, it will be important to look out for trailing leads, frayed leads, broken plugs and sockets, along with leaking roofs, or any contact with water. What safety measures are in place? Are there emergency stop buttons, trip switches, and overload devices? Is first aid equipment available? What safety signs are present?

The safety observer may be first on the scene and could have to deal initially with the consequences of a serious electrocution.

General Principles.

The first thing would be to identify and isolate the power source if a victim is still in contact with a live wire for example. Any observer or helper has to be sure of their own safety as well. Obviously, call for an ambulance if needed. Once that is done, then specific help may well have to be given very quickly.

The One arm drag method

It may be necessary to remove someone from the initial site. This method is part of the training offered by low voltage rescue training in Sydney.

Unconscious causality.

If the electric shock is serious this could well be the outcome. Measures will be needed to deal with this.

CPR (Cardiopulmonary Resuscitation)

If a casualty is not breathing, and there is no pulse, then CPR will have to be attempted immediately. This is a sign that the heart has stopped beating

Recording the event.

All details of any incident need to be communicated and recorded. Also,Sydney low voltage rescue training will help with suggestions for LVR equipment and resources.

USI Number.

Before starting this Sydney low voltage rescue training course, a USI (Unique Student Identifier) number is needed. This can be obtained online. To find low voltage rescue training Sydney has for you, go towww.mlewisohs.au.com